The primary purpose of dental handpieces in any dental office is to treat the patients more quickly and comfortably. As like other dental equipment, routine maintenance procedures must be followed to ensure the handpieces continue to function at their best. In order to perform and to protect patients from any risks related to these instruments, all of these dental handpieces need to be kept in good condition. It is crucial not just for maintaining the operation of hand piece but also for preventing future breaks that would require more expensive repairs. In this blog, we are going to discuss some important steps for maintaining the hand pieces from dental equipment suppliers in India.  

Pre-Cleaning ; Immediate’ Post-Use Care

After use, the handpiece should be unplugged from the dental unit and cleaned with a soft brush and a slightly moist cloth to remove any remaining dirt. Use low-density detergent, if necessary, but stay away from substances that could damage the handpiece. This process prevents saliva, blood and debris from collecting on the handpiece, which would otherwise cause it to function badly.

Cleaning; deep cleaning to remove all the debris.

Use the handpiece cleaner, designed especially for cleaning dental instruments, for a thorough cleaning scrub. To remove any leftover materials, thoroughly clean both the inside and exterior surfaces of the handpiece. When extremely stubborn dirt is present, ultrasonic cleaning can be helpful; however, always follow the manufacturer’s directions to avoid damaging the handpiece. This step reduces cross-contamination and prepares the handpiece for the sterilization process.

Lubrication; for a smooth and efficient running

According to researchers, it is crucial for the smooth running of the hand pieces. Another area that needs to be looked into is the maintenance of dental handpieces, particularly the lubrication component, which is essential to the smooth operation of such machinery. Maintain the handpiece by cleaning it frequently and using high-quality lubrication as advised by the manufacturer. Apply the lubricant to the parts that need it, such as the turbine and gears, once the manufacturer has specified which ones to use. Applying the right amount of lubrication is important since, similar to under-lubrication, over-lubrication can also cause issues. It is recommended to follow the manufacturer’s usage guide and do this either every day or after every use.

Sterilization; for Ensuring Patient Safety

After cleaning and lubrication, sterilize the hand piece as per the direction of the manufacturing company. Some parts of the dental handpiece can be autoclaved, while others may need to be disassembled or covered. It is always crucial to make sure that the handpieces are clean before putting them into the autoclave, especially if there is little moisture, which may cause damage to the equipment.

Inspection; regular and thorough checking

It is important to check the condition of the handpieces that are commonly used on patients for wear and tear signs like crackling, corrosion, or other component strains. It is necessary to examine any indicators of overheating or mechanical system defects, such as knocks, rattling, diminished efficiency, exterior or interior casing and related part deterioration. Especially paying attention to the turbine of the handpiece is necessary due to its significance in the structure of the handpiece. Any worn or damaged instruments should be changed quickly to prevent the degradation of the efficiency and safety of the handpiece. Small problems that can be solved must be solved immediately so that more severe problems do not occur, which can significantly reduce the life of the equipment.

Proper Storage; for long term use

Handpieces should be cleaned and then stored in a dry, clean place away from moisture and dust. To protect it from impacts of external forces and from coming into contact with contaminants, cover it with a physically protective case or cover. Reprocessing makes the handpieces more suited for use and, hand pieces when maintained correctly, prolongs their lifespan.

Make an appointment for your dental handpieces to receive routine expert servicing. Expert servicing can find and fix problems that might not be obvious, even with thorough in-house maintenance. To maintain the best possible condition for the handpieces, adhere to the manufacturer’s guidelines for how frequently they should be professionally maintained. Getting professional handpiece servicing done once or twice a year is recommended.

Also Read: Which is the best online site for buying dental equipment?

In conclusion, if you follow these 7 steps, you will be able to control the state of your dental handpieces from top dental equipment supplier in Kerala, knowing that they will be performing at their best and that their endurance will be fairly long. The only apparent disadvantage of maintenance is that, while it may initially be expensive, it is a one-time charge that could have saved a significant amount of money had incidents happened frequently enough to necessitate replacements and repairs. Apart from that, patient safety is one of the most important aspects of any health care facility, as is patient satisfaction. Implementation of these practices within the limitations of the dental office environment will go a long way toward achieving the intended benefits, such as enhanced patient care and productivity.